KKEUT CLINIC

Treatments / Events

[Impressive] Lifting / Firmness / Asymmetry Correction[Fine Lines, Elasticity, Pores] 10Therma Lifting

[Fine Lines, Elasticity, Pores] 10Therma Lifting

Pain Score (out of 5) ☆☆☆☆★ Downtime Score (out of 5) ☆☆☆☆☆ ✔ [Genuine Tips & Precise Dosage] We ensure sufficient thermal energy delivery by using genuine tips and never holding back on energy. ✔ [1:1 Customized Lifting] We provide personalized design lifting, not a factory-like approach, with custom designs that consider your skin thickness, fat layer, sagging, and sunken areas. ✔ [Accumulated Heat Handling] Precise control of handpiece pressure, speed, and time uniformly accumulates heat, creating a firm and long-lasting effect. * VAT excluded

Options

[First Treatment EVENT] Genuine Tip 10Therma 100 Shots

Firming from deep within the skin, Elasticity Lifting, 10Therma Precise design considering left-right asymmetry Improves fine lines, elasticity, and pores, Anti-aging lifting that builds up in your skin with each session

125,000 KRW

249,000 KRW

49%

[First Treatment EVENT] Genuine Tip 10Therma 300 Shots

369,000 KRW

725,000 KRW

49%

[First Treatment EVENT] Genuine Tip 10Therma 600 Shots

719,000 KRW

1,390,000 KRW

48%

[EVENT] Genuine Tip 10Therma 100 Shots

140,000 KRW

279,000 KRW

49%

[EVENT] Genuine Tip 10Therma 300 Shots

399,000 KRW

689,000 KRW

42%

[EVENT] Genuine Tip 10Therma 600 Shots

749,000 KRW

1,390,000 KRW

46%

KKEUT Clinic 10Therma RF Lifting

How Monopolar RF Lifting Works

Monopolar radiofrequency (RF) is a non-surgical lifting modality that generates resistive heating as current flows through the skin.

This heat raises dermal collagen to ~60–70°C, producing immediate fiber contraction (tightening) and stimulating fibroblasts to synthesize new collagen and elastin.

Right after treatment: dermal collagen contracts → instant firmness
Weeks later: controlled thermal repair → neocollagenesis → lift continues to build

In short, you get both immediate and delayed benefits.

Monopolar vs. Bipolar RF

Monopolar: penetrates deeper—advantageous for double chin, jawline, nasolabial folds.
Bipolar: acts more superficially—great for texture, pores, fine lines.

Device choice is tailored to skin thickness, fat volume, and sensitivity.

10Therma vs. Oligio

Both are monopolar RF platforms, but they differ in how they deliver and control energy.

1) Real-time impedance checking

Oligio: impedance is measured once at the start and applied broadly.
10Therma : impedance is checked on every shot with per-pulse output compensation.
→ Thermage-style logic that reduces regional variability and promotes even, stable heating.

Summary: If Thermage is the archetype for per-shot impedance control, 10Therma emulates that approach; Oligio focuses on value.

2) Tip footprint

10Therma tips are larger than Oligio/Thermage.
A larger tip deposits stronger energy over a wider area per shot.
300 shots of 10Therma > 300 shots of Oligio in treated area and stimulus
→ More robust effect with longer durability (under comparable settings).

3) Epidermal cooling strength

Epidermal cooling is key for comfort and safety in monopolar RF.

10Therma provides stronger cooling than Oligio, allowing higher-intensity passes with less pain, especially on thin or sensitive skin.

KKEUT Advantages with 10Therma

1) Evidence-based energy planning — threshold dosing

We don’t rely on “as warm as tolerable.” We follow study-based protocols:

≥ 0.07 kJ per shot
≥ 40 kJ total energy

These thresholds are planned to exceed the minimum needed for collagen remodeling, while we maximize comfort within your tolerance.

(Referenced literature: Hong 2022 / Kim 2022 / Laubach 2009.)

2) Fully personalized design

Not just “tightening skin.” We consult on asymmetry, concern zones, and laxity and map a plan that fits your facial structure for natural, harmonious lifting.

3) Design grid + “Super-Pass” layering

We draw a treatment grid to segment the face, then apply Super-Pass layering to stack heat safely exactly where needed.

→ Less unnecessary overheating, precise cumulative effect, and longer-lasting firmness.

4) Transparent counting — you see your shots

At the end, we show the exact shot count delivered.

Trustworthy treatment, transparent results.

5) Respecting your time — 5% off per 10 minutes of wait

If an unavoidable wait occurs, we credit 5% per 10 minutes.

Benefits

Powerful cooling → minimal discomfort
Per-shot impedance checks → maximized safety/consistency
Large tip → strong stimulus, longer durability
Non-invasive → no general anesthesia, minimal downtime

Who Is It For?

Forehead, glabellar, and nasolabial fold concerns
Full-face lifting and elasticity improvement
Pore/texture refinement
Double chin reduction
Want Thermage-level lifting but with friendlier pricing
Prefer fast recovery and want to avoid surgery or injectable lifting

Treatment Steps

Cleansing
Conductive gel application
10Therma RF lifting
Finishing care

Aftercare

On thinner skin, a tip-shaped redness pattern may remain 1–2 weeks and typically fades naturally.
Redness, warmth, tingling, swelling, tooth sensitivity can occur and usually resolve in 1–2 weeks.
Follow your clinician’s moisturizing and sunscreen guidance.

Q&A

고객님들이 가장 많이 물어보시는 내용을 모았습니다.

Q. How painful is the Tenssarma treatment?

Tenssarma has one of the strongest cooling performances among monopolar RF (Thermage-copy lifting) devices. Thanks to its powerful cooling, the epidermis is protected, and the pain is tolerable, with most patients undergoing the treatment without significant discomfort.

Q. I've had Botox or filler treatments. Can I still get Tenssarma?

It is generally fine to receive Tenssarma treatment after about a month. If you are considering various treatments, it is best to decide after a consultation.

Q. How many shots are needed to see results?

For Tenssarma lifting, a minimum of 300 shots per session is standard. However, we recommend 600 shots or more, as a higher number of shots ensures sufficient energy accumulation, leading to longer-lasting lifting effects.

Q. Are there any complementary treatments that would be beneficial?

Tenssarma targets the dermal layer, so combining it with treatments that stimulate other layers can double the effects. Targeting the fascia layer: Shurink (HIFU) Targeting the fat layer: Onda Lifting (Microwave) By combining treatments layer by layer, you can experience a comprehensive, three-dimensional lifting effect that covers the entire facial structure.

Q. How long does the treatment take?

The Tenssarma lifting procedure takes approximately 20 minutes. Thanks to the quick treatment time, busy professionals can easily receive it during their lunch break or after work without burden.

Q. Will it be noticeable the next day?

There is almost no downtime. Occasionally, some redness or swelling may appear for 1-2 days, but it will not interfere with daily life, and makeup can be applied immediately.

Q. How many sessions do I need?

Tenssarma lifting is a long-term management treatment for anti-aging. While you can see effects from just one session, you will experience the most significant difference with consistent, periodic treatments.

Q. What is the recommended treatment interval?

For 300 shots: Recommended every 3-6 months For 600 shots: Recommended every 6 months to 1 year The interval may vary depending on the number of shots and individual skin condition.

[Fine Lines, Elasticity, Pores] 10Therma Lifting